org.acplt.oncrpc
Class XdrHttpDecodingStream

java.lang.Object
  org.acplt.oncrpc.XdrDecodingStream
      org.acplt.oncrpc.XdrHttpDecodingStream

public class XdrHttpDecodingStream
extends XdrDecodingStream

The XdrHttpDecodingStream class provides the necessary functionality to XdrDecodingStream to receive XDR data through HTTP tunnels.

Please note that there is currently no standard about how to tunnel XDR data over HTTP connections. There are a (quite a) few solutions out there, but they are more or less incompatible due to the lack of a RFC.

This class is responsible solely for receiving ONC/RPC replies. The reply data is base64 encoded and embedded within an ordinary plain ASCII page, as is shown in this example.

     DEADBEEFDEADBEEFDEADBEEF...<CR><LF>
     B0D0EADSDEADBEEFB0D0EADS...<CR><LF>
     ...<CR><LF>
     DEADBE==<CR><LF>
 

Parsing is minimalistic to make the whole sucker as fast as possible (not looking at Java's performance at all).

Version:

$Revision: 1.3 $ $Date: 2005/11/11 21:23:44 $ $State: Exp $ $Locker: $

Author:

Harald Albrecht

Constructor Summary

XdrHttpDecodingStream(HttpClientConnection httpClient)
Constructs a new XdrHttpDecodingStream.

Method Summary

void	beginDecoding() Initiates decoding of the next XDR record.
void	close() Closes this decoding XDR stream and releases any system resources associated with this stream.
void	endDecoding() End decoding of the current XDR record.
java.net.InetAddress	getSenderAddress() Returns the Internet address of the sender of the current XDR data.
int	getSenderPort() Returns the port number of the sender of the current XDR data.
int	xdrDecodeInt() Decodes (aka "deserializes") a "XDR int" value received from a XDR stream.
void	xdrDecodeOpaque(byte[] opaque, int offset, int length) Decodes (aka "deserializes") a XDR opaque value, which is represented by a vector of byte values, and starts at offset with a length of length.
byte[]	xdrDecodeOpaque(int length) Decodes (aka "deserializes") an opaque value, which is nothing more than a series of octets (or 8 bits wide bytes).

Methods inherited from class org.acplt.oncrpc.XdrDecodingStream

getCharacterEncoding, setCharacterEncoding, xdrDecodeBoolean, xdrDecodeBooleanFixedVector, xdrDecodeBooleanVector, xdrDecodeByte, xdrDecodeByteFixedVector, xdrDecodeByteVector, xdrDecodeDouble, xdrDecodeDoubleFixedVector, xdrDecodeDoubleVector, xdrDecodeDynamicOpaque, xdrDecodeFloat, xdrDecodeFloatFixedVector, xdrDecodeFloatVector, xdrDecodeIntFixedVector, xdrDecodeIntVector, xdrDecodeLong, xdrDecodeLongFixedVector, xdrDecodeLongVector, xdrDecodeOpaque, xdrDecodeShort, xdrDecodeShortFixedVector, xdrDecodeShortVector, xdrDecodeString, xdrDecodeStringFixedVector, xdrDecodeStringVector

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

XdrHttpDecodingStream

public XdrHttpDecodingStream(HttpClientConnection httpClient)

Constructs a new XdrHttpDecodingStream.

Parameters:

httpClient - HTTP client connection from which to read the encoded and embedded ONC/RPC reply message.

Method Detail

getSenderAddress

public java.net.InetAddress getSenderAddress()

Returns the Internet address of the sender of the current XDR data. This method should only be called after beginDecoding(), otherwise it might return stale information.

Specified by:

getSenderAddress in class XdrDecodingStream

Returns:

InetAddress of the sender of the current XDR data.

getSenderPort

public int getSenderPort()

Returns the port number of the sender of the current XDR data. This method should only be called after beginDecoding(), otherwise it might return stale information.

Specified by:

getSenderPort in class XdrDecodingStream

Returns:

Port number of the sender of the current XDR data.

beginDecoding

public void beginDecoding()
                   throws OncRpcException,
                          java.io.IOException

Initiates decoding of the next XDR record. For HTTP-based XDR we just read the content delivered with the answer to the POST command.

Specified by:

beginDecoding in class XdrDecodingStream

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.

endDecoding

public void endDecoding()
                 throws OncRpcException,
                        java.io.IOException

End decoding of the current XDR record. The general contract of endDecoding is that calling it is an indication that the current record is no more interesting to the caller and any allocated data for this record can be freed.

To help the HTTP connection keeping alive, we swallow all data until we reach the end. If this is not possible, either because the server indicated that it can not keep the connection open, the content length was unknown in advance, or we got an I/O exception, we close the connection.

Overrides:

endDecoding in class XdrDecodingStream

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.

close

public void close()
           throws OncRpcException,
                  java.io.IOException

Closes this decoding XDR stream and releases any system resources associated with this stream. A closed XDR stream cannot perform decoding operations and cannot be reopened.

This implementation frees the allocated buffer but does not close the associated datagram socket. It only throws away the reference to this socket.

Overrides:

close in class XdrDecodingStream

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.

xdrDecodeInt

public int xdrDecodeInt()
                 throws OncRpcException,
                        java.io.IOException

Decodes (aka "deserializes") a "XDR int" value received from a XDR stream. A XDR int is 32 bits wide -- the same width Java's "int" data type has.

Specified by:

xdrDecodeInt in class XdrDecodingStream

Returns:

The decoded int value.

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.

xdrDecodeOpaque

public byte[] xdrDecodeOpaque(int length)
                       throws OncRpcException,
                              java.io.IOException

Decodes (aka "deserializes") an opaque value, which is nothing more than a series of octets (or 8 bits wide bytes). Because the length of the opaque value is given, we don't need to retrieve it from the XDR stream. This is different from xdrDecodeOpaque(byte[], int, int) where first the length of the opaque value is retrieved from the XDR stream.

Specified by:

xdrDecodeOpaque in class XdrDecodingStream

Parameters:

length - Length of opaque data to decode.

Returns:

Opaque data as a byte vector.

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.

xdrDecodeOpaque

public void xdrDecodeOpaque(byte[] opaque,
                            int offset,
                            int length)
                     throws OncRpcException,
                            java.io.IOException

Decodes (aka "deserializes") a XDR opaque value, which is represented by a vector of byte values, and starts at offset with a length of length. Only the opaque value is decoded, so the caller has to know how long the opaque value will be. The decoded data is always padded to be a multiple of four (because that's what the sender does).

Specified by:

xdrDecodeOpaque in class XdrDecodingStream

Parameters:

opaque - Byte vector which will receive the decoded opaque value.

offset - Start offset in the byte vector.

length - the number of bytes to decode.

Throws:

OncRpcException - if an ONC/RPC error occurs.

java.io.IOException - if an I/O error occurs.